T&B Lugs

T&B Lugs
1 Stop Shopping at 1aCableTools for Thomas and Betts Lugs.
Grid | List (1 to 7 of 7) « Prev | Next »
15502 Thomas & Betts (T&B), H-TAP, HEX Die, ALUMINUM, BLUE color code, D die code.

15502 Thomas & Betts (T&B), H-TAP, HEX Die, ALUMINUM, BLUE color code, D die code.

15502 Thomas & Betts (TNB) H-TAP Die, ALUMINUM, BLUE color code, D die code. Use with 272T100 TBM14M manual hydraulic crimp tool to install Aluminum H-taps. . DISCONTINUED. MAY BE USED.
$135.00
54923BE Thomas & Betts CU Lug LB, 1H 5/8" 750kcmil, BLACK, 106

54923BE Thomas & Betts CU Lug LB, 1H 5/8" 750kcmil, BLACK, 106

54923BE Thomas and Betts copper 1-hole compression connector with straight long barrel. Made for 750 kcmil wire, it is color-keyed BLACK (die color) 106 (die code) for easy identification. Lug is tin plated with a blind end and takes one 5/8" bolt.
$16.06
CHT750103 Thomas & Betts H-Tap, 350 MCM - 750 MCM, YELLOW

CHT750103 Thomas & Betts H-Tap, 350 MCM - 750 MCM, YELLOW

CHT75010-3 Thomas & Betts H-Tap, 350 MCM - 750 MCM, YELLOW for permanent pig tailing, two-way splicing or tapping to an unbroken continuous main. Install with 272T100 TBM14M Insulated head Hydraulic crimper and 272T250 15612CH H-TAP die.
$17.00
CHT81410 Thomas & Betts H-Tap, 14 AWG-8 AWG, GREEN

CHT81410 Thomas & Betts H-Tap, 14 AWG-8 AWG, GREEN

CHT814-10 Thomas & Betts H-Tap, 14 AWG-8 AWG, GREEN use this H-Tap on #14 AWG - #8 AWG main wire, and #14 AWG - #8 AWG branch wire. Install with 272T100 TBM14M Insulated head Hydraulic crimper and 272T155 15CA37RCH H-Tap die.
$4.50
STAKIT THOMAS & BETTS Sta-Kon Crimp Kit Splices Terminals & Crimp Tool

STAKIT THOMAS & BETTS Sta-Kon Crimp Kit Splices Terminals & Crimp Tool

Thomas & Betts STA-KON Crimp Kit is the popular assortment of pre-assembled vinyl insulated splices, rings, forks, disconnects, & terminals. STA-KON Crimp Kit is recommended for residential or light commercial installations.
$370.00
STAPOUCH-HS T&B Sta-Kon Heat Shrink Terminal Kit, StaPouch-HS

STAPOUCH-HS T&B Sta-Kon Heat Shrink Terminal Kit, StaPouch-HS

T&B STAPOUCH-HS Heat Shrink Kit includes the popular sizes of ring terminals and butt splices, a butane torch, wire stripper and crimp tool.
$246.00
TBM14 M Thomas & Betts TNB Hydraulic Crimper, 14 Ton Insulated-Head

TBM14 M Thomas & Betts TNB Hydraulic Crimper, 14 Ton Insulated-Head

TBM14M Thomas and Betts Color-Keyed hydraulic compression tool for copper and aluminum connectors, lugs, C-, H- and bus bar taps for #8 AWG - 1000 MCM wire. The 15500-series dies may be ordered separately.
$1,859.00
Grid | List (1 to 7 of 7) « Prev | Next »
© 2018 1aCableTools.com. All rights reserved. eCommerce Shopping Cart from Solid Cactus.
eCommerce software powered by SolidCactusEcommerce